| Price | Bid Increment |
|---|---|
| $0 | $10 |
| $100 | $25 |
| $500 | $50 |
| $1,000 | $100 |
| $2,000 | $250 |
| $5,000 | $500 |
| $10,000 | $1,000 |
| $25,000 | $2,500 |
| $50,000 | $5,000 |
SHIPPING: $35
Winchester Model 12 20 Gauge 23" Pump Action Shotgun, Factory Cutts Compensator, Factory Vent-Rib, C&R
LSB#: LSB260825RH398
Make: Winchester
Model: Model 12
Serial Number: 1582847
Year of Manufacture: Circa 1957 / C&R
Caliber/Gauge: 20 Gauge
Chokes: Threaded, Spreader (SPR) Installed
Action Type: Pump Action
Barrel Length: 23", factory vent-rib, 27" with Factory Cutts Compensator
Sights / Optics: The front sight is a metallic bead fixed to the top of the Cutts compensator. There is a metallic mid-bead. The top of the vent-rib and receiver are serrated for glare reduction.
Stock Configuration & Condition: The shotgun is fitted with a checkered walnut pistol-grip stock and slide handle with a fluted straight comb and a Winchester checkered hard rubber buttplate. The LOP measures 14" from the front of the trigger to the rear of the buttplate. There are no chips or cracks. There are light handling scratches on the buttstock. Overall, the stocks rate in Very Good condition.
Type of Finish: Blued
Finish Originality: Original
Bore Condition: The smoothbore is bright. There is no erosion. In this writer's opinion the bore rates 9/10.
Overall Condition: This shotgun retains about 95% of its original blued finish. The balance of the finish shows light intermittent oxidation and thinning on the leading edges. The markings are clear and legible. The screw heads are sharp. The pins are clean. Overall, this shotgun rates in Very Good condition.
Mechanics: The action functions correctly. As with all used firearms, a thorough cleaning may be necessary to meet your maintenance standards.
Box, Paperwork & Accessories: None.
Our Assessment: Most Cutts Compensators seen on Model 12s were fitted after the gun left New Haven, but this 20 gauge left the factory wearing one, paired with a factory vent rib on round posts, and that combination is the heart of this gun. The Model 12 itself needs little introduction, as the slide-action Winchester introduced in 1912 as the Model 1912 and produced until 1964 set the standard every pump gun since has been measured against, and this example carries matching serial numbers on the barrel extension and receiver. Serial 1582847 dates the gun to circa 1957, late in the model's long run.
The compensator is the Lyman-made Cutts, its cage marked with the Cutts diamond and the Lyman Middlefield address, and the tube installed is the Spreader, the widest-pattern tube in the set and a natural match for a light 20 gauge over skeet targets or close upland birds. The gun retains about 95% of its original blue with light intermittent oxidation, the bore rates 9/10, and the action functions correctly. A factory Cutts, factory rib 20 gauge Model 12 is a genuinely uncommon find. Please see our high quality photos and good luck on your bids! -T'Z
Available payment options
LSB Offers In-House Shipping
Lock Stock & Barrel Investments Inc.
2301 Lt. Childers St.
Cody, WY 82414
United States
T +13075278915