| Price | Bid Increment |
|---|---|
| $0 | $10 |
| $100 | $25 |
| $500 | $50 |
| $1,000 | $100 |
| $2,000 | $250 |
| $5,000 | $500 |
| $10,000 | $1,000 |
| $25,000 | $2,500 |
| $50,000 | $5,000 |
SHIPPING: $75.00
Early WWII Winchester WRA US M1 Garand .30-06 Semi-Auto Rifle Feb 1942 C&R
LSB#: LSB260804CM259
Make: Winchester
Model: M1 Garand
Serial Number: 148825
Year of Manufacture: February 1942
Caliber: .30-06 Springfield
Action Type: Semi Auto, 8 round en bloc clip fed
Markings: There is no import mark.
Receiver: “U.S. RIFLE / CAL. .30 M1 / WINCHESTER/ TRADE MARK / 148825”
Receiver Bottom: “AP”.
Trigger Group: “D28290-W.R.A.”
Safety: "5-4WRA" is visible.
Hammer: “C46008-1 W.R.A.”
Trigger Guard: "C46025 W.R.A."
Follower: “11”
Receiver Leg: “D28291-2 / SA 9-63” The SA 9-63 is in electro pencil indicating a Springfield Armory rebuild in 1963.
Op Rod: “D35382-W.R.A.” Slant Cut
Barrel: “X P 5" with a Winchester firing proof "WP"
Bolt: “D28287-1 W.R.A."
This rifle has a one piece milled short fork follower rod.
Windage knob: "LEFT" twice with Arrows.
Elevation Knob: "BATTLE RANGE UP DOWN"
Stock: The grip is marked with a Circle "P" acceptance stamp. The left flank has a faint ordnance wheel and "WRA WB" for Col. Waldemar S. Broberg. This appears to be the correct stock. Solid one piece metal butt plate.
Barrel Length: 24”
Sights / Optics: The front sight is a blade set between two protective wings. The rear sight is a fully adjustable aperture sight set between two protective wings.
Stock Configuration & Condition: The wood stock has a semi-pistol grip, metal nose caps, stacking loop, double sling loops, and a metal butt plate. The LOP measures 13”. The stock has been sanded and refinished. The wood shows lines, compressions, small chips, scratches, scrapes, and rub marks throughout. There is a notable chip missing from the bottom left side near the bottom metal and the left edge of the forend. The comb has some sizable dents. There are no visible cracks. The butt plate shows some marks and wear to the edges. The checkering is mostly sharp. Overall the stock set is in about Fair-Good condition.
Type of Finish: Parkerized
Finish Originality: Original.
Bore Condition: The bore is semi bright and the rifling is Visible-defined. There is erosion/pitting visible in the bore mainly in the last third. Our gauges show a muzzle of 1 and a throat erosion of 1+-2. In this writer's opinion the bore rates 8/10.
Overall Condition: The rifle retains 55%% of its metal finish. The receiver has lost almost all of its finish. The balance of the rifle shows some thinning finish and discoloration from age. There is some scattered surface rust freckling. The clip latch shows pitting. The friction surfaces of the bolt and the receiver show some rub wear. The action is rough and the bolt gets stuck if the action is closed hard. The markings are clear and the screw heads are sharp. Overall this rifle is in about Fair condition.
Mechanics: The action functions correctly although as stated it is rough. We have not fired this rifle. As with all previously owned firearms, a thorough cleaning may be necessary to meet your maintenance standards.
Box, Paperwork & Accessories: None
Our Assessment: This Winchester M1 Garand was manufactured in February 1942, during the earliest period of American production of the rifle. Early Winchester examples are especially sought after, and this rifle retains a notably desirable group of early features, including its Winchester trigger group, slant-cut operating rod, one-piece milled short-fork follower rod, and solid one-piece metal butt plate. The stock appears correct for the rifle and bears the “WRA WB” inspection mark associated with Col. Waldemar S. Broberg.
The electro-penciled “SA 9-63” marking on the receiver leg indicates that the rifle was inspected at Springfield Armory in September 1963, most likely as part of the process of evaluating and retiring it from military service. There is no indication from this marking alone that the rifle was rebuilt. The action is rough, while the bore is semi-bright with visible rifling. Erosion and pitting are present, concentrated mainly in the final third of the bore. Gauge readings measure 1 at the muzzle and 1+ to 2 at the throat rating 8/10. Despite its mechanical roughness, the rifle’s early production date and remarkably intact, largely original Winchester configuration make it an especially collectible example, particularly given how rarely these rifles survive with so many of their early factory features still intact. To better understand this M1 please see our high quality photos via the link and best of luck with your bidding!!!-R.L.
Available payment options
LSB Offers In-House Shipping
Lock Stock & Barrel Investments Inc.
2301 Lt. Childers St.
Cody, WY 82414
United States
T +13075278915